LINUXSOFT.cz Přeskoč levou lištu

ARCHIV



   

> Diskuze: Poradna Fedora 8: Nejde zvuk na notebooku Packard Bell Easynote F5281

Fedora 8: Nejde zvuk na notebooku Packard Bell Easynote F5281
(link)
30.12.2007 14:49
z2008

System se tvari jako ze zvukovka funguje, ale ve skutecnosti zvuk nejde. Jedna se o notebook Packard Bell Easynote F5281 a pod Win XP zvuk jde, ale s Linuxem teprve zacinam a nevim si rady. Muzete mi poradit?
Aktualni verze po aktualizaci: 2.6.23.9-85.fc8
------- System Config Soundcard Log -------- Tue Dec 11 17:53:19 GMT 2007
------- lspci -------- 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11) 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25) 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) 00:09.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter 02:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
------- lspci -vn -------- 00:00.0 0600: 1039:0661 (rev 11) Subsystem: 1631:c004 Flags: bus master, medium devsel, latency 32 Memory at f0000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [c0] AGP version 3.5
00:01.0 0604: 1039:0003 (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, fast devsel, latency 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000dfff Memory behind bridge: e0000000-efffffff Prefetchable memory behind bridge: a0000000-afffffff
00:02.0 0601: 1039:0963 (rev 25) Flags: bus master, medium devsel, latency 0
00:02.1 0c05: 1039:0016 Flags: medium devsel I/O ports at 1400 [disabled] [size=32]
00:02.5 0101: 1039:5513 (prog-if 80 [Master]) Subsystem: 1631:c004 Flags: bus master, medium devsel, latency 64 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at 1100 [size=16]
00:02.6 0703: 1039:7013 (rev a0) (prog-if 00 [Generic]) Subsystem: 1631:c004 Flags: bus master, medium devsel, latency 128, IRQ 17 I/O ports at e000 [size=256] I/O ports at e100 [size=128] Capabilities: [48] Power Management version 2
00:02.7 0401: 1039:7012 (rev a0) Subsystem: 1631:c004 Flags: bus master, medium devsel, latency 128, IRQ 17 I/O ports at e200 [size=256] I/O ports at e300 [size=128] Capabilities: [48] Power Management version 2
00:03.0 0c03: 1039:7001 (rev 0f) (prog-if 10 [OHCI]) Subsystem: 1631:c004 Flags: bus master, medium devsel, latency 32, IRQ 19 Memory at f4000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2
00:03.1 0c03: 1039:7001 (rev 0f) (prog-if 10 [OHCI]) Subsystem: 1631:c004 Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at f4001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2
00:03.3 0c03: 1039:7002 (prog-if 20 [EHCI]) Subsystem: 1631:c004 Flags: bus master, medium devsel, latency 128, IRQ 18 Memory at f4002000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2
00:04.0 0200: 1039:0900 (rev 91) Subsystem: 1631:c004 Flags: bus master, medium devsel, latency 128, IRQ 21 I/O ports at e400 [size=256] Memory at f4003000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 38000000 [disabled] [size=128K] Capabilities: [40] Power Management version 2
00:09.0 0607: 104c:ac50 (rev 02) Subsystem: 1631:c004 Flags: bus master, medium devsel, latency 168, IRQ 16 Memory at 38020000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 30000000-33fff000 (prefetchable) Memory window 1: 34000000-37fff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff 16-bit legacy interface ports at 0001
01:00.0 0300: 1039:6330 (prog-if 00 [VGA]) Subsystem: 1631:c004 Flags: 66MHz, medium devsel, IRQ 22 BIST result: 00 Memory at a0000000 (32-bit, prefetchable) [size=128M] Memory at e0000000 (32-bit, non-prefetchable) [size=128K] I/O ports at c000 [size=128] Capabilities: [40] Power Management version 2 Capabilities: [50] AGP version 3.0
02:00.0 0280: 14e4:4318 (rev 02) Subsystem: 1799:7011 Flags: bus master, fast devsel, latency 64, IRQ 16 Memory at 34000000 (32-bit, non-prefetchable) [size=8K]
------- lsmod -------- Module Size Used by rfcomm 36825 0 l2cap 25537 9 rfcomm bluetooth 49316 4 rfcomm,l2cap sunrpc 140765 1 nf_conntrack_ipv4 11717 2 ipt_REJECT 7617 2 iptable_filter 6465 1 ip_tables 14213 1 iptable_filter nf_conntrack_ipv6 18769 2 xt_state 6081 4 nf_conntrack 51977 3 nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state nfnetlink 8281 3 nf_conntrack_ipv4,nf_conntrack_ipv6,nf_conntrack xt_tcpudp 6977 8 ip6t_ipv6header 6209 2 ip6t_REJECT 8257 2 ip6table_filter 6337 1 ip6_tables 15109 2 ip6t_ipv6header,ip6table_filter x_tables 14277 7 ipt_REJECT,ip_tables,xt_state,xt_tcpudp,ip6t_ipv6header,ip6t_REJECT,ip6_tables loop 16581 0 dm_multipath 18249 0 ipv6 245989 12 nf_conntrack_ipv6,ip6t_REJECT snd_intel8x0 30429 6 snd_usb_audio 75329 0 snd_usb_lib 17345 1 snd_usb_audio snd_rawmidi 21185 1 snd_usb_lib snd_hwdep 10309 1 snd_usb_audio arc4 5953 2 ecb 6721 2 blkcipher 9029 1 ecb snd_seq_dummy 6725 0 rc80211_simple 7361 1 snd_intel8x0m 16845 1 snd_ac97_codec 92389 2 snd_intel8x0,snd_intel8x0m ac97_bus 6081 1 snd_ac97_codec snd_seq_oss 29889 0 snd_seq_midi_event 9793 1 snd_seq_oss snd_seq 44849 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event b43 129393 0 mac80211 131409 2 rc80211_simple,b43 snd_seq_device 10061 4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq cfg80211 10441 1 mac80211 snd_pcm_oss 37569 0 snd_mixer_oss 16705 3 snd_pcm_oss snd_pcm 63685 6 snd_intel8x0,snd_usb_audio,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss battery 14025 0 sis900 22209 0 snd_timer 20549 2 snd_seq,snd_pcm button 10321 0 ssb 29893 1 b43 snd 43461 22 snd_intel8x0,snd_usb_audio,snd_rawmidi,snd_hwdep,snd_intel8x0m,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ac 8133 0 mii 8385 1 sis900 serio_raw 9029 0 i2c_sis96x 8517 0 soundcore 9633 3 snd snd_page_alloc 11337 3 snd_intel8x0,snd_intel8x0m,snd_pcm i2c_core 21825 1 i2c_sis96x sr_mod 17509 0 sg 31965 0 joydev 11649 0 cdrom 33889 1 sr_mod dm_snapshot 17893 0 dm_zero 5825 0 dm_mirror 21697 0 dm_mod 46465 9 dm_multipath,dm_snapshot,dm_zero,dm_mirror ata_generic 8901 0 pata_sis 14277 2 libata 99761 2 ata_generic,pata_sis sd_mod 27329 3 scsi_mod 120141 4 sr_mod,sg,libata,sd_mod ext3 111177 2 jbd 52585 1 ext3 mbcache 10305 1 ext3 uhci_hcd 23633 0 ohci_hcd 21573 0 ehci_hcd 31693 0
------- /etc/modprobe.conf -------- alias eth1 sis900 options snd cards_limit=8 alias snd-card-7 snd-usb-audio options snd-usb-audio index=7
------- /etc/asound.conf -------- #Generated by system-config-soundcard #If you edit this file, don't run system-config-soundcard, #all your changes here could be lost. #SWCONF #DEV 0 defaults.pcm.card 0 defaults.pcm.device 0 defaults.ctl.card 0
------- aplay -l -------- **** List of PLAYBACK Hardware Devices **** card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: Modem [SiS SI7013 Modem], device 0: Intel ICH - Modem [SiS SI7013 Modem - Modem] Subdevices: 1/1 Subdevice #0: subdevice #0
------- amixer -------- Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 65536 Mono: Front Left: Playback 48623 [74%] [on] Front Right: Playback 48623 [74%] [on] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch cswitch-joined Capture channels: Front Left - Front Right Limits: Capture 0 - 65536 Front Left: Capture 0 [0%] [on] Front Right: Capture 0 [0%] [on]
------- /proc/asound/version -------- Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 23 06:09:18 2007 UTC).
------- rpm -q alsa-lib -------- alsa-lib-1.0.15-1.fc8
------- rpm -q alsa-utils -------- alsa-utils-1.0.15-1.fc8
------- /proc/asound/modules -------- 0 snd_intel8x0 1 snd_intel8x0m
------- /proc/asound/pcm -------- 01-00: Intel ICH - Modem : SiS SI7013 Modem - Modem : playback 1 : capture 1 00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1 00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1
------- /etc/sysconfig/hwconf -------- - class: OTHER bus: PCI detached: 0 driver: snd-intel8x0m desc: "Silicon Integrated Systems [SiS] AC'97 Modem Controller" vendorId: 1039 deviceId: 7013 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 2 pcifn: 6 - class: OTHER bus: PCI detached: 0 driver: i2c-sis96x desc: "Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller" vendorId: 1039 deviceId: 0016 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 2 pcifn: 1 - class: OTHER bus: PCI detached: 0 desc: "Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO]" vendorId: 1039 deviceId: 0963 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 2 pcifn: 0 - class: OTHER bus: PCI detached: 0 desc: "Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)" vendorId: 1039 deviceId: 0003 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 1 pcifn: 0 - class: OTHER bus: PSAUX detached: 0 desc: "Lid Switch" - class: OTHER bus: USB detached: 0 desc: "Linux 2.6.23.1-42.fc8 ehci_hcd EHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 1 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.23.1-42.fc8 ehci_hcd usbprod: EHCI Host Controller - class: OTHER bus: USB detached: 0 desc: "Linux 2.6.23.1-42.fc8 ohci_hcd OHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 2 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.23.1-42.fc8 ohci_hcd usbprod: OHCI Host Controller - class: OTHER bus: USB detached: 0 desc: "Linux 2.6.23.1-42.fc8 ohci_hcd OHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 3 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.23.1-42.fc8 ohci_hcd usbprod: OHCI Host Controller - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0200" deviceId: PNP0200 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0303" deviceId: PNP0303 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0800" deviceId: PNP0800 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0a03" deviceId: PNP0a03 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0b00" deviceId: PNP0b00 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0c01" deviceId: PNP0c01 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0c02" deviceId: PNP0c02 - class: OTHER bus: ISAPNP detached: 0 desc: "PNP0c04" deviceId: PNP0c04 - class: OTHER bus: PSAUX detached: 0 desc: "Power Button (FF)" - class: OTHER bus: ISAPNP detached: 0 desc: "SYN0c02" deviceId: SYN0c02 compat: SYN0c00,PNP0f13 - class: OTHER bus: PCI detached: 0 desc: "Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host" vendorId: 1039 deviceId: 0661 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 0 pcifn: 0 - class: OTHER bus: PSAUX detached: 0 desc: "Sleep Button (CM)" - class: NETWORK bus: PCI detached: 0 device: eth1 driver: sis900 desc: "Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet" network.hwaddr: 00:40:d0:61:a2:9c vendorId: 1039 deviceId: 0900 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 4 pcifn: 0 - class: MOUSE bus: PSAUX detached: 0 device: input/mice driver: generic3ps/2 desc: "Macintosh mouse button emulation" - class: MOUSE bus: PSAUX detached: 0 device: input/mice driver: synaptics desc: "SynPS/2 Synaptics TouchPad" - class: AUDIO bus: PCI detached: 0 driver: snd-intel8x0 desc: "Silicon Integrated Systems [SiS] AC'97 Sound Controller" vendorId: 1039 deviceId: 7012 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 2 pcifn: 7 - class: CDROM bus: SCSI detached: 0 device: scd0 desc: "QSI DVDRW SDW-041" host: 1 id: 0 channel: 0 lun: 0 - class: VIDEO bus: PCI detached: 0 desc: "Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter" video.xdriver: sis vendorId: 1039 deviceId: 6330 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 1 pcidev: 0 pcifn: 0 - class: HD bus: SCSI detached: 0 device: sda desc: "ATA IC25N040ATMR04-0" host: 0 id: 0 channel: 0 lun: 0 - class: KEYBOARD bus: PSAUX detached: 0 desc: "AT Translated Set 2 keyboard" - class: USB bus: PCI detached: 0 driver: ehci-hcd desc: "Silicon Integrated Systems [SiS] USB 2.0 Controller" vendorId: 1039 deviceId: 7002 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 3 pcifn: 3 - class: USB bus: PCI detached: 0 driver: ohci-hcd desc: "Silicon Integrated Systems [SiS] USB 1.0 Controller" vendorId: 1039 deviceId: 7001 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 3 pcifn: 1 - class: USB bus: PCI detached: 0 driver: ohci-hcd desc: "Silicon Integrated Systems [SiS] USB 1.0 Controller" vendorId: 1039 deviceId: 7001 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 3 pcifn: 0 - class: SOCKET bus: PCI detached: 0 driver: yenta_socket desc: "Texas Instruments PCI1410 PC card Cardbus Controller" vendorId: 104c deviceId: ac50 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 9 pcifn: 0 - class: IDE bus: PCI detached: 0 driver: pata_sis desc: "Silicon Integrated Systems [SiS] 5513 [IDE]" vendorId: 1039 deviceId: 5513 subVendorId: 1631 subDeviceId: c004 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 2 pcifn: 5
------- dmesg -------- Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002bff0000 (usable) BIOS-e820: 000000002bff0000 - 000000002bffffc0 (ACPI data) BIOS-e820: 000000002bffffc0 - 000000002c000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 703MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 180208) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 180208 HighMem 180208 -> 180208 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 180208 On node 0 totalpages: 180208 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1375 pages used for memmap Normal zone: 174737 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000E5010, 0014 (r0 OID_00) ACPI: RSDT 2BFFCD40, 0030 (r1 INSYDE RSDT_000 1 _CSI 10101) ACPI: FACP 2BFFFA90, 0074 (r1 INSYDE FACP_000 100 _CSI 10101) ACPI: DSDT 2BFFCD80, 2D06 (r1 INSYDE Demo 1002 INTL 2002036) ACPI: FACS 2BFFFFC0, 0040 ACPI: APIC 2BFFFB20, 0068 (r1 INSYDE APIC_000 30303030 0000 30303030) ACPI: BOOT 2BFFFB90, 0028 (r1 INSYDE ISC_BOOT 100 _CSI 10101) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 178801 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07a8000 soft=c0788000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2793.066 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 705776k/720832k available (2183k kernel code, 14488k reserved, 1117k data, 280k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xec800000 - 0xff7fe000 ( 303 MB) lowmem : 0xc0000000 - 0xebff0000 ( 703 MB) .init : 0xc073f000 - 0xc0785000 ( 280 kB) .data : 0xc0621f7d - 0xc0739544 (1117 kB) .text : 0xc0400000 - 0xc0621f7d (2183 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 5588.95 BogoMIPS (lpj=2794475) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20070126 CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09 Total of 1 processors activated (5588.95 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=1552 bytes Booting paravirtualized kernel on bare hardware Time: 17:35:07 Date: 12/11/07 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xe8404, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 ACPI: PCI Root Bridge [PCI0] (0000:00) Enabling SiS 96x SMBus. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VPCI._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *7 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *5 6 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *3 5 6 10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. pnp: 00:03: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:03: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:03: iomem range 0xffee0000-0xffefffff has been reserved pnp: 00:03: iomem range 0xfffc0000-0xffffffff could not be reserved pnp: 00:05: ioport range 0x480-0x48f has been reserved pnp: 00:05: ioport range 0x1000-0x107f has been reserved pnp: 00:05: ioport range 0x1080-0x10ff has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-dfff MEM window: e0000000-efffffff PREFETCH window: a0000000-afffffff PCI: Bus 2, cardbus bridge: 0000:00:09.0 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 30000000-33ffffff MEM window: 34000000-37ffffff ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3577k freed Simple Boot Flag at 0x37 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1197394507.487:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 230FF4508E76ABC1 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126] isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected SiS chipset - id:1633 agpgart: AGP aperture is 64M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17 ACPI: PCI interrupt for device 0000:00:02.6 disabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:00:09.0 [1631:c004] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:09.0, mfunc 0x01021002, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000020 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 3:695:592 Freeing unused kernel memory: 280k freed Write protecting the kernel read-only data: 849k ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 18 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: irq 18, io mem 0xf4002000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 19, io mem 0xf4000000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 20, io mem 0xf4001000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected pccard: CardBus card inserted into slot 0 Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb3, caps: 0xa04713/0x0 USB Universal Host Controller Interface driver v3.0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 SCSI subsystem initialized libata version 2.21 loaded. pata_sis 0000:00:02.5: version 0.5.2 scsi0 : pata_sis scsi1 : pata_sis ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011100 irq 14 ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011108 irq 15 ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD4A, max UDMA/100 ata1.00: 78140160 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2.00: ATAPI: QSI DVDRW SDW-041, DX35, max UDMA/33 ata2.00: configured for UDMA/33 ata2: EH pending after completion, repeating EH (cnt=4) scsi 0:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM QSI DVDRW SDW-041 DX35 PQ: 0 ANSI: 5 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1197394513.610:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 8 users, 11 roles, 2317 types, 112 bools, 1 sens, 1024 cats security: 67 classes, 207815 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1197394514.220:3): policy loaded auid=4294967295 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 cs: IO port probe 0xa00-0xaff: clean. sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400 ACPI: AC Adapter [AC] (on-line) PCI: Enabling device 0000:02:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 snd_timer: Unknown symbol snd_info_register snd_timer: Unknown symbol snd_info_create_module_entry snd_timer: Unknown symbol snd_info_free_entry snd_timer: Unknown symbol snd_iprintf snd_timer: Unknown symbol snd_ecards_limit snd_timer: Unknown symbol snd_oss_info_register snd_timer: Unknown symbol snd_unregister_device snd_timer: Unknown symbol snd_device_new snd_timer: Unknown symbol snd_register_device_for_dev input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLPB] sis900.c: v1.08.10 Apr. 2 2006 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21 0000:00:04.0: ICS LAN PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default ACPI: Battery Slot [BAT0] (battery absent) eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 21, 00:40:d0:61:a2:9c. net eth1: device_rename: sysfs_create_symlink failed (-17) udev: renamed network interface eth0 to eth1 b43-phy0: Broadcom 4318 WLAN found b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7 b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8 ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17 phy0: Selected rate control algorithm 'simple' usbcore: registered new interface driver snd-usb-audio ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17 intel8x0_measure_ac97_clock: measured 50459 usecs intel8x0: clocking to 48000 SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 22 audit(1197394530.290:4): avc: denied { create } for pid=1154 comm="Xorg" name="fb0" scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file audit(1197394530.290:5): avc: denied { create } for pid=1154 comm="Xorg" name="fb1" scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file audit(1197394530.290:6): avc: denied { create } for pid=1154 comm="Xorg" name="fb2" scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file audit(1197394530.290:7): avc: denied { create } for pid=1154 comm="Xorg" name="fb3" scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file audit(1197394530.290:8): avc: denied { create } for pid=1154 comm="Xorg" name="fb4" scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file audit(1197394530.290:9): avc: denied { create } for pid=1154 comm="Xorg" name="fb5" scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file audit(1197394530.290:10): avc: denied { create } for pid=1154 comm="Xorg" name="fb6" scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file audit(1197394530.290:11): avc: denied { create } for pid=1154 comm="Xorg" name="fb7" scontext=system_u:system_r:xdm_xserver_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file device-mapper: multipath: version 1.0.5 loaded loop: module loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 1441784k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1441784k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a ip6_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (11264 buckets, 45056 max) ip_tables: (C) 2000-2006 Netfilter Core Team audit(1197394546.176:12): audit_pid=1470 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth1: Media Link Off ADDRCONF(NETDEV_UP): eth1: link is not ready b43-phy0 debug: Adding Interface type 2 b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/bcm43xx#devicefirmware and download the correct firmware (version 4). b43-phy0 debug: Adding Interface type 2 b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed. b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/bcm43xx#devicefirmware and download the correct firmware (version 4). rarian-sk-get-c[2278]: segfault at 00000000 eip 002d6153 esp bfb59aec error 4
Alsamixer na sve hlavni obrazovce rika ze karta je PulseAudio a chipset taky, po stisknuti F2 rika tohle:
| /proc/asound/version: # │ │==================== # │ │ │Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).# │ │ │ # │ │ │/proc/asound/cards: # │ │ │=================== # │ │ │ 0 [SI7012 ]: ICH - SiS SI7012 # │ │ │ SiS SI7012 with VT1616i at irq 17 # │ │ │ 1 [Modem ]: ICH-MODEM - SiS SI7013 Modem # │ │ │ SiS SI7013 Modem at irq 17 # │ │ │ # │ │ │/proc/asound/devices: # │ │ │===================== # │ │ │ 2: : timer # │ │ │ 3: : sequencer # │ │ │ 4: [ 0- 1]: digital audio capture # │ │ │ 5: [ 0- 0]: digital audio playback # │ │ │ 6: [ 0- 0]: digital audio capture # │ │ │ 7: [ 0] : control ▒ │ │ │ 8: [ 1- 0]: digital audio playback ▒ │ │ │ 9: [ 1- 0]: digital audio capture ▒ │ │ │ 10: [ 1] : control
│/proc/asound/oss/devices: ▒ │ │ │========================= ▒ │ │ │ 0: [0- 0]: mixer ▒ │ │ │ 1: : sequencer ▒ │ │ │ 3: [0- 0]: digital audio ▒ │ │ │ 4: [0- 0]: digital audio ▒ │ │ │ 8: : sequencer ▒ │ │ │ 12: [0- 1]: digital audio # │ │ │ 16: [1- 0]: mixer # │ │ │ 19: [1- 0]: digital audio # │ │ │ 20: [1- 0]: digital audio # │ │ │ # │ │ │/proc/asound/timers: # │ │ │==================== # │ │ │G0: system timer : 1000.000us (10000000 ticks) # │ │ │P0-0-0: PCM playback 0-0-0 : SLAVE # │ │ │P0-0-1: PCM capture 0-0-1 : SLAVE # │ │ │P0-1-1: PCM capture 0-1-1 : SLAVE # │ │ │P1-0-0: PCM playback 1-0-0 : SLAVE # │ │ │P1-0-1: PCM capture 1-0-1 : SLAVE # │ │ │ # │ │ │/proc/asound/pcm: # │ │ │================= # │ │ │00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1 # │ │ │00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1 # │ │ │01-00: Intel ICH - Modem : SiS SI7013 Modem - Modem : playback 1 : capture 1 #

DISKUZE

Fedora 8: Nejde zvuk na notebooku Packard Bell Easynote F5281 30.12.2007 14:49 z2008




Příspívat do diskuze mohou pouze registrovaní uživatelé.
> Vyhledávání software
> Vyhledávání článků

28.11.2018 23:56 /František Kučera
Prosincový sraz spolku OpenAlt se koná ve středu 5.12.2018 od 16:00 na adrese Zikova 1903/4, Praha 6. Tentokrát navštívíme organizaci CESNET. Na programu jsou dvě přednášky: Distribuované úložiště Ceph (Michal Strnad) a Plně šifrovaný disk na moderním systému (Ondřej Caletka). Následně se přesuneme do některé z nedalekých restaurací, kde budeme pokračovat v diskusi.
Komentářů: 1

12.11.2018 21:28 /Redakce Linuxsoft.cz
22. listopadu 2018 se koná v Praze na Karlově náměstí již pátý ročník konference s tématem Datová centra pro business, která nabídne odpovědi na aktuální a často řešené otázky: Jaké jsou aktuální trendy v oblasti datových center a jak je optimálně využít pro vlastní prospěch? Jak si zajistit odpovídající služby datových center? Podle jakých kritérií vybírat dodavatele služeb? Jak volit vhodné součásti infrastruktury při budování či rozšiřování vlastního datového centra? Jak efektivně datové centrum spravovat? Jak co nejlépe eliminovat možná rizika? apod. Příznivci LinuxSoftu mohou při registraci uplatnit kód LIN350, který jim přinese zvýhodněné vstupné s 50% slevou.
Přidat komentář

6.11.2018 2:04 /František Kučera
Říjnový pražský sraz spolku OpenAlt se koná v listopadu – již tento čtvrtek – 8. 11. 2018 od 18:00 v Radegastovně Perón (Stroupežnického 20, Praha 5). Tentokrát bez oficiální přednášky, ale zato s dobrým jídlem a pivem – volná diskuse na téma umění a technologie, IoT, CNC, svobodný software, hardware a další hračky.
Přidat komentář

4.10.2018 21:30 /Ondřej Čečák
LinuxDays 2018 již tento víkend, registrace je otevřená.
Přidat komentář

18.9.2018 23:30 /František Kučera
Zářijový pražský sraz spolku OpenAlt se koná již tento čtvrtek – 20. 9. 2018 od 18:00 v Radegastovně Perón (Stroupežnického 20, Praha 5). Tentokrát bez oficiální přednášky, ale zato s dobrým jídlem a pivem – volná diskuse na téma IoT, CNC, svobodný software, hardware a další hračky.
Přidat komentář

9.9.2018 14:15 /Redakce Linuxsoft.cz
20.9.2018 proběhne v pražském Kongresovém centru Vavruška konference Mobilní řešení pro business. Návštěvníci si vyslechnou mimo jiné přednášky na témata: Nejdůležitější aktuální trendy v oblasti mobilních technologií, správa a zabezpečení mobilních zařízení ve firmách, jak mobilně přistupovat k informačnímu systému firmy, kdy se vyplatí používat odolná mobilní zařízení nebo jak zabezpečit mobilní komunikaci.
Přidat komentář

12.8.2018 16:58 /František Kučera
Srpnový pražský sraz spolku OpenAlt se koná ve čtvrtek – 16. 8. 2018 od 19:00 v Kavárně Ideál (Sázavská 30, Praha), kde máme rezervovaný salonek. Tentokrát jsou tématem srazu databáze prezentaci svého projektu si pro nás připravil Standa Dzik. Dále bude prostor, abychom probrali nápady na využití IoT a sítě The Things Network, případně další témata.
Přidat komentář

16.7.2018 1:05 /František Kučera
Červencový pražský sraz spolku OpenAlt se koná již tento čtvrtek – 19. 7. 2018 od 18:00 v Kavárně Ideál (Sázavská 30, Praha), kde máme rezervovaný salonek. Tentokrát bude přednáška na téma: automatizační nástroj Ansible, kterou si připravil Martin Vicián.
Přidat komentář

   Více ...   Přidat zprávičku

> Poslední diskuze

31.7.2023 14:13 / Linda Graham
iPhone Services

30.11.2022 9:32 / Kyle McDermott
Hosting download unavailable

13.12.2018 10:57 / Jan Mareš
Re: zavináč

2.12.2018 23:56 / František Kučera
Sraz

5.10.2018 17:12 / Jakub Kuljovsky
Re: Jaký kurz a software by jste doporučili pro začínajcího kodéra?

Více ...

ISSN 1801-3805 | Provozovatel: Pavel Kysilka, IČ: 72868490 (2003-2024) | mail at linuxsoft dot cz | Design: www.megadesign.cz | Textová verze